10m 2.5mm/3.5mm Stainless Steel Wire 880lb (Bare Wire Crimp Style)

The all rounder cable size, perfect for 90% of Aussie land based shark fishing.

• 2.5mm diameter wire
• 10m length
• 7x7 49 strand stainless steel wire
• 3.5mm White nylon coating 
• 10 x slim nickel plated copper crimps for multiple traces

*** These can be crimped with a small hand crimper at 2.5mm. ***

METHOD:

Step 1: measure 11cm at cable end and mark

Step 2: cut a ring around nylon coating 

Step 3: use either wire stripping tool, or lay knife/razor flat against the wire and cut strip of coating from the ring cut, 11cm to the end of the wire... And then remove the remainder of the coating by hand.

Step 4: holding the bare wire end, slide on 2 crimps, then hook or swivel, and loop wire back and slide into the 2 crimps 

Step 5 crimp all down as hard as possible, but leave last 2mm closest to the wire loop uncrimped as shown in example.

*** Wire and crimps supplied, to be assembled by the purchaser, no hooks and swivels included. ***